Domestic Diva Table Runner
Posted by administrator on Friday, September 17th, 2010
Domestic Diva Table Runner Tutorial
Course instructor: Jody of pleasant-home.com
Domestic Diva Table Runner Tutoria
1.
Fussy Cut 4 1/2" squares from the Domestic Diva's fabric showing the Domestic Diva's at work . picture
I cut 8 Diva's for my Table Runner. Finished Table Runner size is approx. 10 1/2" x 73"
picture
2.
Cut 8 - 2 1/2" Squares from the light fabrics for each Block ( = 64 light squares) Either iron the squares in half on the diagonal or mark with a pencil. (this will be your sewing line)
picture-squares dots
3.
Cut 4 - 2 1/2" x 4 1/2" rectangles from the medium/dark prints for each block.
Also cut 4 - 2 1/2" squares from the medium/dark prints, for each block.
Sew the light 2 1/2" squares as shown to the med./drk. rectangle's, following the sewing line you either ironed in or marked with a pencil.
*picture-cupcake and block
4.
Trim leaving a 1/4" seam allowance
*picture w ruler
It will look like this.
*picture cut
Press open.
*picture
5.
Sew another light square to the other side as shown. Trim and press open.
*piture
It will look like this. (you will make 4 of these).
*picture
6.
Sew the med/drk 2 1/2" squares to 2 of the rectangle pieces, as shown on the left in this photo. (one square on each end)
*picture
7.
Sew the smaller rectangle pieces to 2 facing sides of the fussy cut square, as shown.
*picture
8.
Sew the longer rectangle pieces to the remaining two facing sides of the fussy cut square
Picture
Tah Dah! Block completed
*picture
I used one of the light fabrics as sashing for the Table Runner. Cutting 1 3/4" strips. Sew these strips in between each block and the ends, then sew the remaining strips to both sides.
I used left over fabric cut into strips and sewn together, for my backing. Quilt and Bind.
last two pictures
Supplies:
1/4 yard of cream Diva Main
3/8 yard cream Diva Dot
1/4 yard green Diva Cupcakes
1/4 yard green Diva Damask
3/8 yard of cream Diva Apron for sashing and border
7/8 yard for back
1/2 yard binding
Course instructions:
1.
Fussy Cut 4 1/2" squares from the Domestic Diva's fabric showing the Domestic Diva's at work .
I cut 8 Diva's for my Table Runner. Finished Table Runner size is approx. 10 1/2" x 73"
2.
Cut 8 - 2 1/2" Squares from the light fabrics for each Block ( = 64 light squares) Either iron the squares in half on the diagonal or mark with a pencil. (this will be your sewing line)
3.
Cut 4 - 2 1/2" x 4 1/2" rectangles from the medium/dark prints for each block.
Also cut 4 - 2 1/2" squares from the medium/dark prints, for each block.
Sew the light 2 1/2" squares as shown to the med./drk. rectangle's, following the sewing line you either ironed in or marked with a pencil.
4.
Trim leaving a 1/4" seam allowance
It will look like this.
Press open.
5.
Sew another light square to the other side as shown. Trim and press open.
It will look like this. (you will make 4 of these).
6.
Sew the med/drk 2 1/2" squares to 2 of the rectangle pieces, as shown on the left in
this photo. (one square on each end)
7.
Sew the smaller rectangle pieces to 2 facing sides of the fussy cut square, as shown.
8.
Sew the longer rectangle pieces to the remaining two facing sides of the fussy cut square
Tah Dah! Block completed
I used one of the light fabrics as sashing for the Table Runner. Cutting 1 3/4" strips. Sew these strips in between each block and the ends, then sew the remaining strips to both sides.
I used left over fabric cut into strips and sewn together, for my backing. Quilt and
Bind.
Categories:
Home Decor,
Jodi of pleasant-home
Comments
No one has commented yet.
