dresden burst quilt polka dot chair how to

Project Design Team Wednesday ~ Dresden Burst Baby Quilt

Hi There!!

It’s Melissa Mortenson again from the Polkadot Chair blog.  I’m very excited to be sharing with you my latest project for the Riley Blake Design Team.

For this months project,  I decided to make a baby quilt.  I love Dresden Blocks but didn’t want to make an entire quilt of them.   Instead I scattered 3 sizes of them on the front of a quilt.

What to make one?

Here’s How:

You will need:

All fabric is from Go Fly a Kite line from Riley Blake Fabrics. The white fabric with gray dots used for the background is from the Willow line, also from Riley Blake Fabrics.

1/2 yard each of 5 different fabrics to make the dresden points
1/4 yard fabric (may need more for pattern matching) for the centers of the dresdens
1 1/2 yards fabric for quilt back
1/2 yard for binding
1/2 yard for borders
1 yard white with gray dots (or light color) for quilt front
Easy Dresden Ruler
1 1/2 yards cotton batting
Spray Starch
Spray Basting

All seam allowances are 1/4″

First: Complete your Dresden Blocks

You will need 20 pieces to complete each dresden block.

I used 5 different fabrics and cut 4 pieces from each of the 5 fabrics.

You will need to cut: (using the easy dresden ruler)

20 dresden pieces 8″ tall
20 dresden pieces 5″ tall
20 dresden pieces 3″ tall

To begin making your dresden block, fold your cut piece in half lengthwise.  Stitch a 1/4″ seam along the wider edge.

Trim the seam allowance at the corner and turn right side out.

You will have a piece that looks like this.  Starch lightly and press. Repeat until all 20 are sewn.

Pin 2 of your sewn dresden pieces together.  Stitch along one side.

Repeat until all 20 dresden pieces are sewn together.

Press all seams to one side.
Repeat these steps with your other 2 sizes of Dresden’s, so that when you are done you have 3 different sizes of dresden blocks.

Set aside all 3 pieces.

Next: Prepare Quilt Top.

Cut your background fabric (the white with gray dots) to 30″ x 40″.

Cut 4 strips from your border fabric each 4″ wide by the width of the fabric. (so 4″ x 44″)

Stitch 2 4″ border strips to the 40″ sides of your background fabric.  Press seams to one side and trim edges flush with background fabric.

Stitch remaining 2 4″ border strips to the 30″ sides of your background fabric. Press seams to one side. Trim.

Next:  Quilt.

Make a “quilt sandwich” with your prepared quilt top, quilt batting and quilt backing (you do not need to cut it, just leave it as 1 1/2 yards).

Baste well and machine quilt as desired.

I chose to machine quilt circles onto my quilt, using my backing fabric as a guide.

Complete your machine quilting and trim all layers even.

Next: Attach Dresden Blocks to Quilt.

Cut 3 circles from the fabric you wish to use for the center of your dresden blocks. I chose to fussy cut each one.

1 circle 3 1/4″ in diameter
1 circle 4 1/4″ in diameter
1 circle 5 1/4″ in diameter

Place the circle, right side down onto a scrap of white fabric.

Stitch around the entire circle  with 1/4″ seam (don’t leave an opening).  Trim your white fabric and clip the seams around the circle.

Cut a slit in the white fabric and turn the circle right side out.  Press well. Set aside.

Now place the dresdens on your quilt top as you like.  I scattered mine.  Use some spray basting to hold the dresdens in place and LOTS of pins.  Stitch the dresden to the quilt along the outside edge.  Stitch as close to the edge as possible.

After you have stitched all 3 dresdens to the front of your quilt, pin your prepared circles to your blocks.  The 3″ (after sewn) circle goes on the 3″ tall dresden block, the 4″ circle goes on the 5″ tall dresden block and the 4″ circle goes on the 8″ tall dresden block.

Stitch each circle in place, I used an appliqué stitch around the circles to give it a more finished look.

Next: Bind

Cut your binding strips to 2 1/2″ and bind as desired.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>