Hello fellow fabric friends!! Â It’s me,Â Melissa from Happy QuiltingÂ and I am so excited to be here at Riley Blake Designs. Â Today I am tickled pink to be sharing my new tutorial for Simply Modern Monochromatic Stockings with all of you!!! Â I have been wanting to make matching monochromatic stockings for my family for years now and have just been waiting for the right fabrics 😉 Â When I saw some of the newÂ Riley Blake Basics, I knew it was the perfect fit!!
These stockings are so very simple and oh so much fun to make. Â You really can make one in less than an hour Â So let’s show you how to make do it
For each stocking you want to make you will need :
16 to 22″ of a Stocking Fabric
16 to 22″ of a Lining Fabric
9″ of a Cuff Fabric
6-8″ of Â Ric-Rac
21″ of Mini Pom-Poms in White
Stocking Template (Found HERE) *Be sure and click the ACTUAL SIZE button when printing this in Adobe. It will want to automatically shrink it and then you will end up with a smaller stockingÂ – Print, Cut, and Assemble
**Optional – Solid White Fabric Scraps for Appliqued Name
Now, to make these Monochromatic, you will want to use the same color fabrics for each of your pieces as well as your Ric-Rac. Â Luckily, Riley Blake makes it super easy with all of their amazing Basic choices!! Â I am using Medium Damask Reversed for the Stocking, Houndstooth for the Lining, and Swiss Dots for the Cuff. Â Â And a quick note, you will be topstitching, so Matching Thread is really important!! Â Check out the Riley Blake Aurifil Basic Colors Thread box, they are the exact same color of the fabrics 😉
Whether you need 16″ or 22″ of fabric will depend on the orientation of your print, if there is one. Â So for Example, in order for my Damask print to run up and down (and not sidewards) on my stocking, Â I will need to use the larger 22″ cut and place my template sideways on the fabric.
And, in our second example, I don’t really mind which way the Houndstooth print goes so I can use Â the smaller 16″ cut and place my template up and down on the fabric.
So do you have all of your supplies gathered?? Â Excellent, Â let’s make a Stocking!!! Â Oh, and don’t forget to turn on the Christmas tunes, I had so much fun singing along with some Bing Crosby while stitching these up!
STEP 1 – MAKING THE OUTER STOCKING
Start by grabbing two batting scraps appx 16 ” x 20″ Â (this is a great way to use up all those bits and pieces lying around 😉 Â Lay a batting scrap on your work surface, followed by your Stocking Fabric, folded in half with right sides together to make 2 layers of fabric, and then add one more scrap batting on the top. Â So you will have a fabric sandwich that looks a bit like this 😉
Place your stocking template onto the fabric sandwich and trace around the template.
Now, pin around the inside of the traced stocking taking care to catch all 4 layers in your pinning. Â Time to load your matching thread into your machine 😉
Cut the 4 layers of sandwich out along the traced line. Â Now, it’s time to sew all of those together. Â You will be starting on the top right hand corner of the stocking and stopping on the top left hand corner
Stitch a 1/4″ seam along the pinned raw edge, taking care to backstitch at the start and stop. Â A walking foot is incredibly helpful here to push all of those layers through evenly.
Once you have stitched a seam around the stocking Â (notice, the top is still open, we don’t want to stitch that shut Â finish the raw edge by stitching a tight Zig-Zag stitch along the raw edge.
If you have access to a Serger, you can skip the last two stitching sub-steps and simply Serge along the raw edge creating a seam at the same time. Â Just be sure to take out the pins as you go
So now you should have a Stocking Outside that is currently inside out with a layer of batting, two layers of fabric that have right sides together and then another layer of batting, all nicely finished around the sides and bottom. Â Go ahead and set it aside for the moment 😉
STEP 2 – MAKING THE STOCKING LINING
Onto Step 2. Â Gather your Lining fabric and place it with right sides together. Â Using your Stocking pattern again, Trace the stocking shape onto the wrong side of your fabric.
Pin the 2 layers of fabric together along the inside of the traced line. Â Cut the stocking out directly on the traced line. Â Again you are going to stitch a seam starting and stopping at the same points as before. Â However . . .
This time you want to use a 3/8″ seam. Â This just allows your lining to sit inside and lay flat Â a little easier avoiding those bulky finished seams created in the previous step. Â Remember to backstitch at the start and stop of your stocking. Â You will now have a finished lining 😉
STEP 3 – PUTTING THE STOCKING AND LINING TOGETHER.
You will now have an outside stocking piece that is still inside out. Â Go ahead and turn it right side out and then give it a nice pressing rolling the seams out to make sure they are aligned along the edges of the stocking. Â You can keep your Lining inside out 😉
Now, go ahead and insert your lining into the stocking. Â Your stocking is Right Sides Out and your Lining is Right Sides In. Â So the wrong sides of both will come together. Â Â Your lining might want to try and grab onto the batting as you insert it, but just give it a little wiggle until you get it to lie flat inside the stocking.
Once you have your lining snug inside the stockings, align the seams of both pieces on either side of the stocking. Â Pin the seams together. Â Continue to match the raw edges and pin around the entire top of the stocking.
Now, change your machine settings to a basting stitch and stitch a 1/4″ basting seam along the raw edge. Â Once again, Â a walking foot makes this a lot easier and you might have to do a little easing in around the seams, but don’t stress to much, as this will be under the cuff 😉
And now you have a lined outer stocking that should look something like this. Â Go ahead and set it aside for the time being
STEP 4 – MAKING THE STOCKING CUFF
From your Cuff fabric, cut am 8″ x 20″ rectangle. Â Note, you only need one piece this size so your fabric doesn’t need to be folded
Fold your 8″ x 20″ fabric rectangle in half long wise, and then in half short wise again.
Now, grab another long batting scrap and cut it to 3 1/2″ x 19 1/2″. Â Place the batting scrap onto the wrong size of your cuff rectangle, centering it so there is appx. 1/4″ of fabric along either side of the top of your rectangle and nesting it right into the fold leaving 1/2″ of fabric along the top. Â The batting should just stick to the fabric, but if you are worried about it shifting pin it in place along the sides and top.
Now the fun part, adding the names Â I had a good friend embroider our families names onto our cuffs. Â When adding the names, you want to put them in the top left hand quadrant. Â Be sure to center the name in this section. Â To figure the centering take out 1/2″ from the top and sides and 1/4″ from the fold
You can also choose to Applique your names onto your stockings. Â Again, use the same centering technique. Â If you are unsure on how to applique, you can see this video I made on the basics of applique. Â It will walk you through each step of how to do it 😉
**Either way you choose, be sure the batting stays behind the fabric. Â This will make the names pop!!
Â Once you have the name added, fold your cuff rectangle in half short wise and align the raw edges along the side. Â Stitch a 1/4″ seam along the raw edge. Â (this is why the batting is slightly smaller than the rectangle 😉
Now, turn the cuff right side out and then fold it along the pressed fold line. Â The raw edges should align along the top of the cuff to look something like this 😉
STEP 5 – PUTTING IT ALL TOGETHER
And now, you are ready to put it all together!! Â Yippee!!! Â Sorry about these first 2 pictures, I forgot to take them on my original stocking, so you get them in a new color 😉
Grab your matching color ric-rac and cut a 6″-8″ piece. Â The longer the piece, the longer your stocking holder will be. Â I used 6″ Â Fold it in half and place it along the seam on the left hand side of your cuff. Â Pin it in place.
Now, slide the cuff into the basted stocking with the name of the cuff facing front and the stocking facing front. Â So looking from the front you will have a stocking front, a stocking lining, a cuff front, a cuff back, a stocking lining, and finally the stocking back.
Align the seams on either side of the cuff and stocking. Â Pin them in place. Â Continue to align the raw edges and pin through all of the layers. Â Yes, this is a lot of layers 😉
Stitch a 3/8″ seam along the pinned raw edge. Â This will be just over the basting stitch 😉 Â Be sure to Backstitch at the beginning and end. Â And yes, your walking foot is so very, very useful at this part of the process. Â You might have to give it a little yank when you go over the seam with the ric-rac in it. Â It is super bulky 😉
And once again, go ahead and finish the raw edge by stitching a zig-zag stitch along the edge. Â This will keep any loose strings from flying out from underneath your cuff 😉
And you can always serge the raw edge at this point as well 😉
STEP 5 – ADDING THE FINISHING TOUCHES
Almost done now. Â Just time to add the finishing touches. Â Pull the cuff out from the inside of your stocking but don’t fold it over yet. Â You want it sticking straight up. Â And here you are going to add the mini-pom-pom’s to the edge of the cuff.
I found the easiest way to do this is to place the right side of the under your presser foot, then slip the pom-poms under the folded edge and stitch them in place using a 1/8″ seam. Â This may seam a little backwards, but by doing this from the front, you can ensure that the pom-poms are aligned right along the edge of the fold.
Start at the back of the cuff and work your way around the cuff. Â It is easier if you just try to align a few inches at a time Â When you get all the way around the cuff, overlap slightly the pom-poms and backstitch them into place. Â Then cut off any excess trim so the pom-poms line up nice and even.
Now, one final finishing touch. Â Fold your stocking cuff down. Â I like to take an extra second here and press the cuff in place, that way I know I won’t have any lining slipping out into my cuff 😉 Â Now, start at the back of your cuff once more and stitch a 1/8″ topstitch around the entire top of the stocking cuff, backstitching at the start and stop.
The top stitching just Â finishes it off so nice 😉 Â And remember, when doing both of these top stitching embellishments, you want to be super sure that your thread is matching.
The Aurifil Basic Thread box is a perfect match Â Thanks again Riley Blake for letting me use this great thread!! Â And your done!!!! Â And now, just keep going!!! Â There are so many colors to choose from. Â My children loved picking their favorite color for their stocking. Â So fun!!!
EEEkk, I just love the colors!!! Â From the stocking, to the lining, to the cuff, and even the holder, all one fabulous color!!!
I hope you have enjoyed this tutorial and will have so much Christmas fun whipping up your own Simply Modern Monochromatic Stockings. Â And when you are finished, I would love to see them!!! Â You can add a picture of your own fabulous stockings to my Flickr Group here 😉 Â Â I can’t wait to see them all 😉
Thanks for following along and have a Happy (and Merry) Quilting Day!!
Your Quilty Friend